How to Move a Washer and Dryer Without Breaking Them
A washer and dryer are heavy, awkward and full of parts that don't like being bounced around. Move them the wrong way and you can end up with a leak, a broken drum or a washer that shakes the whole apartment. Move them the right way and they'll work the day you plug them in.
Before moving day
1. Find the manual
Search your model number online if the paper manual is long gone. It tells you exactly what your machine needs for a move, including whether it uses shipping bolts.
2. Run a quick empty cycle, then let it dry
Run a short empty cycle to clean it out, then leave the door open for a day so the drum dries. Nobody wants a musty washer in a new apartment.
3. Clean the dryer's lint trap and vent
This is a good time to clear out lint. It's a fire risk, and you won't want to deal with it in the new place.
Disconnecting the washer
Unplug it.
Turn off both water valves, usually behind the machine.
Remove the hoses with a bucket and towels ready. There's always more water in them than you think.
Drain the drain hose into the bucket.
Bag the hoses and tape the bag to the machine so they don't get lost.
Don't skip the shipping bolts
Most front-load washers came with shipping bolts that hold the drum steady. Manufacturers like Whirlpool say they need to go back in before a move, to avoid damage to the suspension inside. Lost yours? Order replacements for your model number before moving day. Top-loaders usually don't use them, but check your manual.
Disconnecting the dryer
Electric dryer
Unplug it, disconnect the vent hose, and tape the cord and door shut.
Gas dryer
Leave this one to a licensed professional. Disconnecting a gas line wrong is dangerous, and the line has to be capped safely. Book it a few days before your move.
Moving day
Use an appliance dolly with straps, not a regular hand truck.
Keep both machines upright.
Wrap them in moving blankets to protect the finish and the walls.
Measure doorways and stairwells first. Laundry machines are wider than people expect.
At the new place
Remove the shipping bolts before you run the washer. Running it with the bolts in can cause serious damage. Then reconnect the hoses, check for leaks, level the machine and run an empty test cycle. For gas dryers, have a pro reconnect the line.
One more NYC thing: check your new lease. Some buildings don't allow in-unit washers at all.
Moving heavy appliances with Lovely
Lovely Moving is a licensed and insured Brooklyn moving company. We wrap heavy pieces in blankets, use the right equipment, and protect your floors and stairwells at both ends. Tell us about your appliances when you book and we'll tell you exactly what to prep.
FAQ
Do I need shipping bolts to move a front-load washer?
Most manufacturers recommend them. Check your manual and order replacements if you've lost them.
Can I move a washer on its side?
Keep it upright. It protects the drum and the suspension.
Can I disconnect a gas dryer myself?
Don't. Hire a licensed professional to disconnect and cap the gas line.
Do I need to drain the washer?
Drain the hoses into a bucket and let the drum dry with the door open before the move.
Moving heavy appliances? Get a free, itemized quote. Call (646) 846-0485 or request your quote online.